parameter language
英 [pəˈræmɪtə(r) ˈlæŋɡwɪdʒ]
美 [pəˈræmɪtər ˈlæŋɡwɪdʒ]
网络 参数语言
双语例句
- The locale is a parameter defining the language that should be used in the application's user interface.
本地语言环境是一个参数，用来定义应用程序用户界面应该使用的语言。 - The Gaussian distribution of heat flux, forced convection heat transfer and the moving of laser heat source are simulated by using APDL ( Ansys parameter design language).
采用APDL语言实现了对热流密度的高斯分布和强制对流换热及移动激光热源的模拟。 - Topology Optimization Design of Microstructure based on the ANSYS Parameter Language
基于ANSYS参数化语言的微结构拓扑优化设计 - The reliability analysis of the internal steel stacks 'installation in multi-flue chimney was carried through by using the special parameter language progam and the probability analysis function of ANSYS software based on Monte-Carlo method and response surface method.
利用ANSYS软件基于Monte-Carlo法和响应面法的概率分析功能，编制专用的参数化语言程序，对某电厂多管式烟囱基于液压提升倒装法的钢内筒安装过程进行可靠性分析。 - In the paper, simplify the mechanism of cigarette rod support system as the Crank and Slipper Mechanism. By establishing the analytical model of the crank and slipper mechanism, the author has worked out its main velocity parameter in C programming language.
并将烟条支撑装置简化为曲柄滑块机构，然后建立了曲柄滑块机构的分析模型，并通过所编写的C语言程序计算出该机构主要运动参数。 - This thises study the intensity stability of cemented sand gravel dam by adoption strength reduction coefficient method and ansys parameter design language.
本文应用强度折减有限元方法对胶结砂砾石坝的强度问题和稳定问题进行了探讨。 - This paper is concerned about whether the parameter of the target language may be reset and whether the L2 learners get indirect access to the universal grammar while they are using the second language.
本文旨在讨论第二语言习得者是否可以对目的与参数进行重设，同时讨论第二语言习得者在语言习得过程中普遍语法的间接可及性问题。 - The paper anti-analyses the dam's elastic module based on the ANSYS parameter design language.
本文应用ANSYS参数化设计语言（APDL）对重力坝弹性模量进行了反演分析。 - Based on the geometrical characteristics of arch dam ′ s shape and the APDL ( Parameter Design Language) of ANSYS software, an optimal design for a double-curvature arch dam with a single circle center and equal thickness by using the sub-problem approximation optimal method is performed.
根据拱坝体形的几何特征，基于ANSYS软件的参数化设计语言（APDL），采用零阶近似优化法进行了单圆心等厚度双曲拱坝的优化设计。 - Basing on the modal analysis of the structure, according to Ansys Parameter Design Language, the program of coherent-vibration input and multi-support seismic input are compiled.
在对模型进行模态分析基础上，利用APDL语言编制地震波一致输入程序和考虑行波效应的多点输入程序，对渡槽结构计算一致输入和多点输入下的地震反应。 - With the foundation of magnetic field analysis of High Temperature Superconducting Transformer, the AC loss were calculated through the program writed with ANSYS parameter develop language ( APDL).
在高温超导变压器磁场分析的基础上，通过ANSYS的参数化语言（APDL）程序计算了高温超导变压器的交流损耗。 - APDL ( ANSYS Parameter Design Language) was used to control the density of thermal flow, velocity and path of scanning.
运用APDL语言控制热源的热流密度、移动速度以及扫描轨迹； - The results provide support for the proposal that the directionality effect may be caused by the branching parameter of the language that the children are acquiring.
试验结果证明：方向性是由语一言的分义参数所决定。 - A high efficiency drill chuck strength analysis system was developed by using Visual Basic. Net and APDL that is a secondary development parameter design language provided by ANSYS.
综合运用VB.Net和ANSYS提供的二次开发语言APDL，研制了一个钻夹头有限元强度分析系统。 - A Tentative Analysis of Parameter Setting in Second Language Acquisition
试析第二语言习得中的参数设定 - Resetting the Pro-drop Parameter under Language Input
从语言输入的角度看主语脱落参数的再设定 - Using ANSYS parameter design language ( APDL), the author studies shape optimization, and explore the procedure.
运用ANSYS参数化设计语言（APDL），进行了重力坝的体形优化研究，并开发了相应优化程序。 - This article specifies the changes of function transfer in different kinds of parameter in language.
对C语言中各种类型的参数在函数调用时发生的变化进行了初步探讨。 - In the technique, the transmission between the old grids and new ones are treated properly based on the ANSYS software by using ANSYS parameter design language called APDL. It can be preliminary basis of FEM simulation on sheet shearing process.
该方法是在ANSYS有限元分析软件的基础上，对新旧网格间的信息传递进行了恰当的处理，利用ANSYS参数设计语言（APDL）编程实现的。 - According to existing failure standard, this thesis uses the element table and parameter language APDL of ANSYS to determine the failure load and the result is tally with the result of experiment.
本文严格按照现有破坏准则判断砌体的开裂，利用ANSYS的单元表运算式功能，并结合APDL参数化语言定义结果参数来判断开裂荷载，计算结果与试验数据相符。 - The optimum results obtained by using the ANSYS Parameter Design Language show that the modified model can meet the requirement of engineering applications.
用ANSYS参数化设计语言（APDL）对该问题进行了优化求解，修正后的模型能够满足工程应用要求。 - A finite element model is set up to calculate the dynamic stress on the journal surface. Calculating program is developed by the ANSYS parameter program language ( APDL) to put on the boundary condition dynamically, solve and record the stress on the designated nodes automatically.
第三，建立了轴颈表面动应力计算有限元模型，采用ANSYS中的参数化编程语言APDL，开发专用计算程序，自动实现动态施加边界条件、求解并记录指定节点上的应力。 - By using macrodefinition of variable length parameter function in C language, this
利用对C语言中可变长参数的宏定义，讨论了一般的可变长参数函数的设计方法，并给出了实用的例子 - The major contents are summarized as follows: 1. In ANSYS parameter design language, program of reliability for resisting wind loading by Monte-Carlo stochastic finite method based on Latin Hypercube Sample method is obtained, which is applied in frame analysis of reliability for resisting wind loading.
应用ANSYS参数化语言（APDL），编写了基于拉丁超立方抽样的蒙特卡罗随机有限元法程序，并将其应用于框架结构的抗风可靠性分析。 - The results show that it's convenient for ANSYS to build and analyze the model of spatial latticed structures by the ANSYS parameter design language.
结果表明，ANSYS能较为便利的通过APDL编程完成此类网壳结构的建模及分析。 - Parameter transfer of Java language is always calling by value via research and analysis of typical program. Parameter transfer isn't completely same for basis type and object type.
通过对典型程序的研究与分析可以看出Java语言的参数传递总是传值调用的，但是对于基本类型的参数和对象类型的参数来说，参数传递的情况不完全相同。 - Using coupling field of ANSYS and parameter design language ( APDL), the structure is simulated with force electric coupling. The biased DC voltage and the AC excitation required by a transmitter are obtained.
利用ANSYS的耦合场分析模块和参数化设计语言（APDL），对结构进行力电耦合仿真，获得其直流偏压和作为发射器时所需的交流电压值。 - ANSYS Parameter Design Language ( APDL) is the nuclear technique for the second development of ANSYS.
参数化程序设计语言APDL是ANSYS二次开发的核心技术。 - Combined with birth and death element method and APDL parameter language make programming, the Finite Element Method ( FEM) is applied to simulation of welding.
使用有限元方法，结合生死单元技术和APDL参数化语言编程，模拟焊接流程。